Shipping only within Germany.
Standard shipping DHL parcel 4.99 euros
Delivery time (DE): 2-3 working days
Special Offer 6:
GSR thread cutting assortment 45 pieces HSS metric thread DIN 2184-2 (DIN 352) + tool holder with ratchet No. 2 + tap guides M3 - M12 + die guides set M3 - M12 + thread cutting fluid 100ml
Pay only 109,99€ instead of the full 159,53€
45-piece thread cutting assortment. M3-M12 RRP €109.42
Tool holder with ratchet No. 2 M5-M12 RRP 7.14€
Tap guide set RRP 17,99€
Die guides for DIN dies RRP 17,99€
PROFI thread cutting agent/thread cutting paste RRP 6.99€
Highlights & Details
- High-speed steel of the HSS alloy group
- very suitable for soft structural steels up to 500 N/mm²
- Free-cutting steels and structural steels up to 800 N/mm²
Description
Round die for hand and machine use
- pre-slit version (Form B)
- with spiral cut on both sides for good chip removal
- Gate 1 3/4 to 2 gears
- for the production of external threads according to DIN ISO 13
- for recutting and cleaning external threads
- Sizes: M3 - M4 - M5 - M6 - M8 - M10 - M12
Die holder, holding tool for dies
- four fastening screws for small diameters, five screws for larger diameters
- Fixing screw with a 90° tip, for centering in the die
- Body made of fine die-cast zinc according to DIN 1743
- Acceptance of round dies according to DIN EN 22568 (DIN 223)
- Sizes: 20x5 - 20x7 - 25x9 - 30x11 - 38x14
GSR DIN die guide set M3 - M12
- perpendicular cut
- clean thread flanks
- Sizes: M3 - M4 - M5 - M6 - M8 - M10 - M12
Single-cut taps for hand and machine use
- Finish cutter, without ring, short cut for blind and through holes, 2 - 3 threads, finished size ISO 2/6H
- for the production of standard internal threads according to DIN 13
- Sizes: M3 - M4 - M5 - M6 - M8 - M10 - M12
Twist drill
- with cylindrical (round) shaft
- Helix angle 27 degrees
- Tip angle 118 degrees
- Production of circular holes by machining
- Sizes: 2.5 - 3.3 - 4.2 - 5.0 - 6.8 - 8.5 - 10.2
Adjustable tap wrench
- burnished and hardened clamping jaws
- knurled steel handles, unscrewable on one side, hole in the handle to increase leverage
- Body hammer finish painted and made of fine zinc die-cast according to DIN 1743
- Holding tools with square
- Size: No. 1.1/2
Thread cutting agent 100 ml
- based on a water/soap base
- very high adhesion during processing
- Water hazard class 2, to be disposed of like normal cooling lubricant.
GSR tap guides set M3 - M12
- easy handling
- perpendicular cut
- automatic centering of the tap
- suitable for short cut (Form C)
- Sizes: M3 - M4 - M5 - M6 - M8 - M10 - M12
Tool holder with ratchet No. 2
- switchable ratchet function for right and left rotation
- hardened clamping jaws (replaceable)
- chrome-plated handle with 3 fixing grooves, middle, left and right
- Holding tools with square
Execution
- Die: drilled chip holes, thread lands cut to gauge, chamfer relief ground
- Die: Outer contour chamfered and pre-slotted (V-groove), with mounting holes for die holder
- Taps: hardened and tempered, ground, relief ground
- Tap: milled square according to DIN 10
- Twist drills: ground point angle, conical grinding, roll-formed
- Twist drill: Surface black by burnishing, marking by metal stamp
- Laser marking: Labeling according to DIN 2197
- up to M6 with reinforced shank and 3 chip flutes, from M7 with falling shank and 4 chip flutes
Scope of delivery
- The goods are delivered in a sturdy metal storage box
Notes
- To use the drills, hand or pillar drills are required
- Adjustable tap wrenches or tool holders are required to use the taps.
- Additional tools and materials are required to use the tool holder.